How to Clear a Clogged Sink

Drag to rearrange sections
Rich Text Content

Blog - Plumbing

To fix a clogged sink, you need to know how to remove the clog. It can be caused by a garbage disposal that is not functioning properly, a buildup of grease in the pipes, or even something that shouldn't have gone down the drain. The following steps will help you get rid of a backed up sink without calling a plumber. Listed below are some ways to clear a plugged bathroom sink.

Wire coat hanger. This is a simple, inexpensive way to remove a clog. All you need to do is straighten the wire hanger and make a hook. Once you have the hook, try to fit it through the drain. It should come out clean. Then, try using a wire drain snake to unclog the sink. This is an effective and cheap way to clear a Clogged Sink.

Baking soda and vinegar. Mixing these two ingredients in equal proportions will work to unclog a clogged sink. The bubbles from these mixture will push down the clog and clear it up. After sprinkling baking soda into the drain, you should wrap a wet towel around the area to prevent any debris from entering the pipe. This simple method should work in most cases. It will also help you clear a clogged sink quickly and effectively.

Baking soda and vinegar. These two ingredients can help unclog a clogged sink. If you can't find a wire probe, try adding some white vinegar. This mixture will dissolve the clog, but it will not reach deeper parts of the drain. You should avoid putting too much vinegar into the drain, as it can block the backflow. A good tip is to use a stopper before pouring the baking soda mixture into the drain.

Another method involves boiling a gallon of water. This is the easiest method because it can be used for clogged sinks. You should boil water in a large pot or a tea kettle, as it makes it easier to pour the water into the drain. Ensure that you do not splash the water into the drain, as it could burn you. After the water has boiled, it should dissolve the clog in a few minutes.

When you're attempting to clear a clogged sink, you can use a solution of salt and baking soda. Both solutions have similar results: these two substances will push the clog down and remove it. When you pour these solutions into the drain, you should use a wet towel to prevent debris from exiting the pipe. A wet towel will prevent the salt from spilling into the drain. As soon as you have finished adding the mixture, you should wait for a few minutes and try again.

If the problem is a small one, you can try using baking soda and white vinegar. This combination is effective for a small blockage, but it's not designed to solve a large clog. For best results, make sure there's no standing water in the drain and that the plug is removed after about 10 minutes. The vinegar and baking soda mixture should be left for about 10 minutes and will dissolve the clump.

rich_text    
Drag to rearrange sections
Rich Text Content
rich_text    

Page Comments